Engine H07d C Manual

Return to site

Engine H07d C Manual

WORKSHOP MANUAL SUBSCRIPTIONS. Online service information is an alternative for our customers who are looking for cost effective repair information - but still want it direct from the manufacturer. Online subscriptions include: Engine, Chassis, Body Builder Information direct from Hino and Workshop Manuals all in one seamless subscription package. Read PDF Engine H07d C Manual Engine H07d C Manual Recognizing the quirk ways to acquire this books engine h07d c manual is additionally useful. You have remained in right site to begin getting this info. Acquire the engine h07d c manual link that we provide here and check out the link. You could purchase guide engine h07d c manual or acquire it as.
Determine why your small engine won't start by checking your fuel levels, spark plug, carburetor, valve & compression levels and more. Follow along to troubleshoot and learn when it's best to service your engine.
Is your fuel fresh?
Stale, untreated gas begins to break down after about a month. Drain the gas from your lawn mower or outdoor power equipment, and then replace with fresh gas and fuel stabilizer to extend the life of your fuel. 
Your fuel needs to be stored in a suitable container and treated with fuel stabilizer to be sure it doesn't go stale. Stale fuel, dirt, and debris are the most common cause of outdoor power equipment not starting or running properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
Is your oil fresh?
Check your oil level and appearance every time you use your engine while it is cold. Your oil typically needs to be changed each season or after every 25 hours of use
Refer to our Checking and Changing Mower Oil FAQ for further assistance.
Is your Carburetor clean?
Dell 1355cn service manuals. The carburetor regulates how air and fuel move through the engine. A dirty carburetor can cause poor engine performance or starting problems.
For cleaning your carburetor, follow these steps.
For rebuilding your carburetor, follow these steps.
Is your Spark Plug faulty?
Disconnected, dirty or fouled spark plugs are common causes for engines that won't start. For small engines, spark plugs typically need to be replaced every season or after 25 hours of use.
You should also check to make sure the spark plug gap is set correctly. An improper spark plug gap could lead to engine knocking and poor performance.
Follow this guide to check and replace your spark plugs.
Are you having Ignition problems?
If your spark plugs look good, problems with your ignition system can also be preventing a spark.
Engine H07d C Manual PdfThese problems can range from a faulty spark plug lead, shorted kill switch or damage to the flywheel.
Engine H07d C Manual TransmissionTo test and fix possible problems, check out our Small Engine Ignition Systems FAQ.
Is your Engine's Exhaust smoking?
If the engine is emitting white or blue smoke, this means your engine is burning oil. Check our Engine emits white/blue smoke while running FAQ for assistance.
If the engine in emitting black smoke, this could mean that the air filter is dirty, the fuel could have gone bad, and/or the carburetor is flooded. Start by checking your air filter, if it looks okay, move onto replacing the gas. If the problem continues, refer to the following for cleaning/replacing your Carburetor
For cleaning your carburetor, follow these steps.
For rebuilding your carburetor, follow these steps.
Valves & Compression System
Air-fuel compression is crucial to engines powering lawn mowers and outdoor power equipment.
If there isn't proper valve clearance or there's a leak, this can cause compression problems that keep an engine from starting. You can perform a compression system with a leak down tester. If you don't have one of these, we recommend visiting your Briggs & Stratton repair dealer.
WARNING: Always read the engine and equipment manual(s) before starting, operating, or servicing your engine or equipment to avoid personal injury or property damage. See an authorized dealer or contact Briggs & Stratton if you are unsure of any procedure or have additional questions. Find all Engine Safety Warnings
Shop Related Maintenance Parts
Learn how to properly and safely use, troubleshoot and maintain your Briggs & Stratton equipment.
Learn about the latest products, step-by-step instructions on how to locate your engine model number and more.
Supportsservicesessentialforpeople'slivelihoods
Hinoenginescontributetoeveryindustrywithexpertiseandtechnologycultivatedincommercialvehicles
Everysingleenginecreatestownsofthefuture
Thinkingaboutpeople,thinkingaboutcities,foramoreprosperousenvironmentandfuture
IndustrialDieselEngines
N04Output 74-132kw（101-180ps）
J05Output 118-138kw（160-188ps）
J08Output 125-213kw（170-290ps）
A09Output 221-279kw（300-380ps）
E13Output 220-380kw（300-517ps）
 The HINO N04 series diesel engine is an advanced version of the W04 series.It employs 4-valve cylinders to generate higher power and comply with higher emission requirements. By fine control of fuel injection, high reliability, durability and low fuel consumption have been realized. 
Engine H07d C Manual Transfer SwitchEngine modelN04C
EPATier 3
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHC, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 4
Bore x Stroke (mm)104×118
Displacement (L)4.009
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm90 (122) / 2,200
Maximum torque N･m (kg･m) / rpm404 (41) / 1,600
Overall dimensions
Length (mm)887
Width (mm)716
Height (mm)751
Dry weight (kg)360
Lubricant & Coolant
Lub. oil capacity (L)7.1
Coolant capacity (L)8.1
Performance curve
 N04CUA
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact Us

Engine model	N04C
EPA	Tier 3
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHC, 4-valve
Combustion chamber	Direct injection type
Injection type	Common rail
Aspiration type	Turbocharged, Intercooled
No. of cylinders	4
Bore x Stroke (mm)	104×118
Displacement (L)	4.009
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	90 (122) / 2,200
Maximum torque N･m (kg･m) / rpm	404 (41) / 1,600
Overall dimensions
Length (mm)	887
Width (mm)	716
Height (mm)	751
Dry weight (kg)	360
Lubricant & Coolant
Lub. oil capacity (L)	7.1
Coolant capacity (L)	8.1
Performance curve	N04CUA

Hino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO J05 series diesel engine was developed based on an engine for HINO medium duty trucks and buses. 
 It belongs to the same family as the HINO J08 series and both series employ lots of common parts, such as pistons, cylinder liners, etc., which allows better availability of spare parts. 
 By fine control of fuel injection, high reliability, durability and low fuel consumption have been realized. 
Engine modelJ05E
EPANon-Certified*1Tier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 4
Bore x Stroke (mm)112×130
Displacement (L)5.123
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm137 (186) / 2,100 137 (186) / 2,100 138 (188) / 2,100 138 (188) / 2,100
Maximum torque N･m (kg･m) / rpm 654 (66) / 1,600 654 (66) / 1,600 660 (67) / 1,600 660 (67) / 1,600
Overall dimensions
Length (mm)1,0631,0631,0531,053
Width (mm)737737836836
Height (mm)1,0451,0451,0851,085
Dry weight (kg)522530572572
Lubricant & Coolant
Lub. oil capacity (L)20.520.5 20.5 20.5
Coolant capacity (L)9.09.09.59.5
Performance curve
 J05ETH
 J05ETB
 J05ETK
 J05EUN
 *1 Available for non-regulated areas in the world. 
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO J08 series diesel engine was developed based on an engine for Hino medium duty trucks and buses. 
 There are two types: the J08C series with an in-line fuel injection pump and the J08E series with a common rail fuel system. 
J08C
Engine modelJ08C
EPATier 2
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeFuel injection pump in-line
Aspiration typeNaturally aspiratedTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)114×130
Displacement (L)7.961
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm129 (175) / 2,500182 (247) / 2,100
Maximum torque N･m (kg･m) / rpm539 (55) / 1,8001,020 (102) / 1,400
Overall dimensions
Length (mm)1,2531,321
Width (mm)711761
Height (mm)902971
Dry weight (kg)565580
Lubricant & Coolant
Lub. oil capacity (L)25.527.5
Coolant capacity (L)11.011.0
Performance curve
 J08CV
 J08CUD
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Glad to hear you fixed it. Usb ethernet for mac high sierra. I cannot afford to lose my Thunderbolt ports, so I was forced to continue hunting.The following solved the issue for me:System Preferences  Network  Select Ethernet on the left side  Select Advanced  Select Hardware TabChange settings to following:Configure: ManuallySpeed: 1000baseTDuplex: full-duplex, energy-efficient-ethernetMTU: Custom - 3000 and above worked for meAVB/EAV Mode: CheckedThese settings were figured out through trial and error on all the permutations essentially.
J08E
Engine modelJ08E
EPANon-Certified*1Tier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)112×130
Displacement (L)7.684
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm209 (284) / 2,100209 (284) / 2,100 213 (290) / 2,100 213 (290) / 2,100
Maximum torque N･m (kg･m) / rpm998 (102) / 1,600998 (102) / 1,6001,017 (104) / 1,6001,017 (104) / 1,600
Overall dimensions
Length (mm)1,2891,2891,3141,314
Width (mm)868868941941
Height (mm)9879871,0871,087
Dry weight (kg)665680736736
Lubricant & Coolant
Lub. oil capacity (L)26.026.028.528.5
Coolant capacity (L)13.013.016.016.0
Performance curve
 J08EUN
 J08ETM
 J08EUV
 J08EVV
 *1Available for non-regulated areas in the world. Liebert serial number lookup.
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO A09 series diesel engine was developed based on an engine for Hino heavy duty trucks and buses. This engine is also mounted on the Hino Dakar Rally race truck. 
 The industrial use version is to be developed in future. 

Engine model	J05E
EPA	Non-Certified*¹	Tier 3	Interim Tier 4	Tier 4 Final
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHV, 4-valve
Combustion chamber	Direct injection type
Injection type	Common rail
Aspiration type	Turbocharged, Intercooled
No. of cylinders	4
Bore x Stroke (mm)	112×130
Displacement (L)	5.123
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	137 (186) / 2,100	137 (186) / 2,100	138 (188) / 2,100	138 (188) / 2,100
Maximum torque N･m (kg･m) / rpm	654 (66) / 1,600	654 (66) / 1,600	660 (67) / 1,600	660 (67) / 1,600
Overall dimensions
Length (mm)	1,063	1,063	1,053	1,053
Width (mm)	737	737	836	836
Height (mm)	1,045	1,045	1,085	1,085
Dry weight (kg)	522	530	572	572
Lubricant & Coolant
Lub. oil capacity (L)	20.5	20.5	20.5	20.5
Coolant capacity (L)	9.0	9.0	9.5	9.5
Performance curve	J05ETH	J05ETB	J05ETK	J05EUN

J08C
Engine model	J08C
EPA	Tier 2
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHV, 4-valve
Combustion chamber	Direct injection type
Injection type	Fuel injection pump in-line
Aspiration type	Naturally aspirated	Turbocharged, Intercooled
No. of cylinders	6
Bore x Stroke (mm)	114×130
Displacement (L)	7.961
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	129 (175) / 2,500	182 (247) / 2,100
Maximum torque N･m (kg･m) / rpm	539 (55) / 1,800	1,020 (102) / 1,400
Overall dimensions
Length (mm)	1,253	1,321
Width (mm)	711	761
Height (mm)	902	971
Dry weight (kg)	565	580
Lubricant & Coolant
Lub. oil capacity (L)	25.5	27.5
Coolant capacity (L)	11.0	11.0
Performance curve	J08CV	J08CUD

J08E
Engine model	J08E
EPA	Non-Certified*¹	Tier 3	Interim Tier 4	Tier 4 Final
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHV, 4-valve
Combustion chamber	Direct injection type
Injection type	Common rail
Aspiration type	Turbocharged, Intercooled
No. of cylinders	6
Bore x Stroke (mm)	112×130
Displacement (L)	7.684
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	209 (284) / 2,100	209 (284) / 2,100	213 (290) / 2,100	213 (290) / 2,100
Maximum torque N･m (kg･m) / rpm	998 (102) / 1,600	998 (102) / 1,600	1,017 (104) / 1,600	1,017 (104) / 1,600
Overall dimensions
Length (mm)	1,289	1,289	1,314	1,314
Width (mm)	868	868	941	941
Height (mm)	987	987	1,087	1,087
Dry weight (kg)	665	680	736	736
Lubricant & Coolant
Lub. oil capacity (L)	26.0	26.0	28.5	28.5
Coolant capacity (L)	13.0	13.0	16.0	16.0
Performance curve	J08EUN	J08ETM	J08EUV	J08EVV

Engine modelA09C
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)112×150
Displacement (L)8.866
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm279 (380) / 1,800
Maximum torque N･m (kg･m) / rpm1,569 (160) / 1,100
Overall dimensions
Length (mm)1,414
Width (mm)884
Height (mm)1,191
Dry weight (kg)953
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO E13 series diesel engine is the flag ship model, developed based on an engine for Hino heavy duty trucks and buses. 
 By fine control of fuel injection, high reliability, durability and low fuel consumption have been realized. 
Engine modelE13C
EPATier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)137×146
Displacement (L)12.913
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm330 (449) / 1,800380 (517) / 1,800*1
Maximum torque N･m (kg･m) / rpm1,930 (197) / 1,3002,120 (216) / 1,300*1
Overall dimensions
Length (mm)1,5221,510*1
Width (mm)9121,098*1
Height (mm)1,2781,296*1
Dry weight (kg)1,1551,250*1
Lubricant & Coolant
Lub. oil capacity (L)39.554.0*1
Coolant capacity (L)28.429.4*1
Performance curve
 E13CUV
 E13CVV*1

Engine model	A09C
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHV, 4-valve
Combustion chamber	Direct injection type
Injection type	Common rail
Aspiration type	Turbocharged, Intercooled
No. of cylinders	6
Bore x Stroke (mm)	112×150
Displacement (L)	8.866
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	279 (380) / 1,800
Maximum torque N･m (kg･m) / rpm	1,569 (160) / 1,100
Overall dimensions
Length (mm)	1,414
Width (mm)	884
Height (mm)	1,191
Dry weight (kg)	953

Engine model	E13C
EPA	Tier 3	Interim Tier 4	Tier 4 Final
Engine specifications
Characteristics	4 cycle, Water-cooled, Vertical in-line
Valve train	OHV, 4-valve
Combustion chamber	Direct injection type
Injection type	Common rail
Aspiration type	Turbocharged, Intercooled
No. of cylinders	6
Bore x Stroke (mm)	137×146
Displacement (L)	12.913
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm	330 (449) / 1,800	380 (517) / 1,800	*¹
Maximum torque N･m (kg･m) / rpm	1,930 (197) / 1,300	2,120 (216) / 1,300	*¹
Overall dimensions
Length (mm)	1,522	1,510	*¹
Width (mm)	912	1,098	*¹
Height (mm)	1,278	1,296	*¹
Dry weight (kg)	1,155	1,250	*¹
Lubricant & Coolant
Lub. oil capacity (L)	39.5	54.0	*¹
Coolant capacity (L)	28.4	29.4	*¹
Performance curve	E13CUV	E13CVV	*¹

Hino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO J05 series diesel engine was developed based on an engine for HINO medium duty trucks and buses. 
 It belongs to the same family as the HINO J08 series and both series employ lots of common parts, such as pistons, cylinder liners, etc., which allows better availability of spare parts. 
 By fine control of fuel injection, high reliability, durability and low fuel consumption have been realized. 
Engine modelJ05E
EPANon-Certified*1Tier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 4
Bore x Stroke (mm)112×130
Displacement (L)5.123
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm137 (186) / 2,100 137 (186) / 2,100 138 (188) / 2,100 138 (188) / 2,100
Maximum torque N･m (kg･m) / rpm 654 (66) / 1,600 654 (66) / 1,600 660 (67) / 1,600 660 (67) / 1,600
Overall dimensions
Length (mm)1,0631,0631,0531,053
Width (mm)737737836836
Height (mm)1,0451,0451,0851,085
Dry weight (kg)522530572572
Lubricant & Coolant
Lub. oil capacity (L)20.520.5 20.5 20.5
Coolant capacity (L)9.09.09.59.5
Performance curve
 J05ETH
 J05ETB
 J05ETK
 J05EUN
 *1 Available for non-regulated areas in the world. 
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO J08 series diesel engine was developed based on an engine for Hino medium duty trucks and buses. 
 There are two types: the J08C series with an in-line fuel injection pump and the J08E series with a common rail fuel system. 
J08C
Engine modelJ08C
EPATier 2
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeFuel injection pump in-line
Aspiration typeNaturally aspiratedTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)114×130
Displacement (L)7.961
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm129 (175) / 2,500182 (247) / 2,100
Maximum torque N･m (kg･m) / rpm539 (55) / 1,8001,020 (102) / 1,400
Overall dimensions
Length (mm)1,2531,321
Width (mm)711761
Height (mm)902971
Dry weight (kg)565580
Lubricant & Coolant
Lub. oil capacity (L)25.527.5
Coolant capacity (L)11.011.0
Performance curve
 J08CV
 J08CUD
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Glad to hear you fixed it. Usb ethernet for mac high sierra. I cannot afford to lose my Thunderbolt ports, so I was forced to continue hunting.The following solved the issue for me:System Preferences  Network  Select Ethernet on the left side  Select Advanced  Select Hardware TabChange settings to following:Configure: ManuallySpeed: 1000baseTDuplex: full-duplex, energy-efficient-ethernetMTU: Custom - 3000 and above worked for meAVB/EAV Mode: CheckedThese settings were figured out through trial and error on all the permutations essentially.
J08E
Engine modelJ08E
EPANon-Certified*1Tier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)112×130
Displacement (L)7.684
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm209 (284) / 2,100209 (284) / 2,100 213 (290) / 2,100 213 (290) / 2,100
Maximum torque N･m (kg･m) / rpm998 (102) / 1,600998 (102) / 1,6001,017 (104) / 1,6001,017 (104) / 1,600
Overall dimensions
Length (mm)1,2891,2891,3141,314
Width (mm)868868941941
Height (mm)9879871,0871,087
Dry weight (kg)665680736736
Lubricant & Coolant
Lub. oil capacity (L)26.026.028.528.5
Coolant capacity (L)13.013.016.016.0
Performance curve
 J08EUN
 J08ETM
 J08EUV
 J08EVV
 *1Available for non-regulated areas in the world. Liebert serial number lookup.
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO A09 series diesel engine was developed based on an engine for Hino heavy duty trucks and buses. This engine is also mounted on the Hino Dakar Rally race truck. 
 The industrial use version is to be developed in future. 
Engine modelA09C
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)112×150
Displacement (L)8.866
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm279 (380) / 1,800
Maximum torque N･m (kg･m) / rpm1,569 (160) / 1,100
Overall dimensions
Length (mm)1,414
Width (mm)884
Height (mm)1,191
Dry weight (kg)953
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086 The HINO E13 series diesel engine is the flag ship model, developed based on an engine for Hino heavy duty trucks and buses. 
 By fine control of fuel injection, high reliability, durability and low fuel consumption have been realized. 
Engine modelE13C
EPATier 3Interim Tier 4Tier 4 Final
Engine specifications
Characteristics4 cycle, Water-cooled, Vertical in-line
Valve trainOHV, 4-valve
Combustion chamberDirect injection type
Injection typeCommon rail
Aspiration typeTurbocharged, Intercooled
No. of cylinders 6
Bore x Stroke (mm)137×146
Displacement (L)12.913
Engine performance (Net) without cooling fan
Rated output kW (ps) / rpm330 (449) / 1,800380 (517) / 1,800*1
Maximum torque N･m (kg･m) / rpm1,930 (197) / 1,3002,120 (216) / 1,300*1
Overall dimensions
Length (mm)1,5221,510*1
Width (mm)9121,098*1
Height (mm)1,2781,296*1
Dry weight (kg)1,1551,250*1
Lubricant & Coolant
Lub. oil capacity (L)39.554.0*1
Coolant capacity (L)28.429.4*1
Performance curve
 E13CUV
 E13CVV*1
 *1Engine performance (Net) without cooling fan 
 The values specified in the Overall dimensions and Lubricant & Coolant are those of engines currently available for sale. They may change at the request of customers.
 Specifications may be changed without prior notice. 
Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086Contact UsHino Motors, Ltd.
CORPORATE SALES & MARKETING DIV.3-1-1, Hinodai, Hino-shi, Tokyo 191-8660, JAPANdiesel@hino.co.jpTEL.+81-42-586-5675 / FAX.+81-42-586-5086